Product Description

[***INCLUDED IN THIS SET: (1)Vinyl Sheridan Shed 10' x 14', (1)Attic Storage Kit, (1)Door Tune-Up Kit] Features: -Easy to assemble pre-cut and pre-drilled parts.-Mid-wall bracing for greater all-around strength.-Double-braced doors for extra strength.-Easy to install.-Force of 1500 lbs. required to remove anchors from ground Anchor Kit - Concrete.-Easy to install.-Lag bolts building directly into concrete slab.-Please specify size.-Assembles in minutes.-Keeps stored items off the ground.-Strong hot-dipped galvanized steel.-Made of heavy duty galvanized steel for durability.-Perfect for all Arrow buildings, garages, basements or workshops.-Shelving material not included.-Increase roof strength by 50pct for heavy snow accumulation.-Easy to install.-Fits most new or existing Arrow buildings.-Please specify size. Includes: -Auger Kit: Includes four 30'' heavy duty steel augers, 60' of aircraft strength cable, and 4 cable clamps.-Concrete Kit: Includes four steel corner gussets and perimeter clips.-1/4 inch masonry drill bit included Foundation Kit 10' x 12'. Construction: -Galvanized steel construction. Color/Finish: -Long lasting vinyl-coating provides a five times thicker finish than standard steel buildings.-Eggshell finish with steel blue door jambs.-Perfect for plywood floor finish. Dimensions: -Each kit contains 4 shelf brackets (8 1/2'' L), 2 pair of telescoping wall braces, complete hardware, and instructions.-Makes it easy to build 8'' or 12'' wide shelves in any length.-Large: 7.25'H x 10'W x 14'D.-Door opening: 5'H x 4.7'W.

Product Description

Heavy Duty Portable Propane Double Burner Outdoor Cooker, 54,000 BTU Cast Burners, UL Listed LP Hose and Regulator with Type 1 Connection, Manifold and Needle Valves for Easy Flame Adjustment, Two Deep Fry Thermometers, Instruction/Recipe Booklet. CSA Design Certified.

• 2-burner outdoor propane cook stove
• Includes 2 high pressure 54,000-Btu burners
• 392 inches of cooking area; CSA design certified
• Needle valves for individual burner control; snap on legs for easy storage
• Also includes hose, regulator, connector; measures 28 by 14 by 30 inches (width by depth by height)

Product Description

This item fits: *2010-2012 Ford Mustang Coupe (All). This kit includes: 1 Left Side Quarter Window Scoop & 1 Right Side Quarter Window Scoop. The 3dCarbon side window scoops are manufactured in High Pressure polyurethane and attach to the side quarter windows. No screws or hole drilling is required. The scoops attach with OE approved 3M Double Face Tape. The scoops will require prepping, priming and painting prior to installation. 3dCarbon supplies a black vinyl panel to be applied to the outside of the glass prior to the scoop installation so the inside of the scoop is not visible from the inside of the car.

Product Description

Delta Full Size aluminum Single Lid Deep Crossover Truck Box complement the truck design and provide an improved view of the bed and rear of the truck. They offer the same high-strength security and other features of standard-height Delta Pro crossovers. The features include: a gear-lock self-adjusting dual rotary locking system that always latches and closes for superior security. A self-aligning latch pin pivots from side-to-side to engage with the gear-lock system; no adjustments are required. A 3-layer laminated RSL (rigid structural lid) has a reverse beveled edge liner and an inner layer of rigid foam insulation to create the most rigid, strongest aluminum lid that has been tested. A reinforced high-strength body and full-wide lock console resists cargo damage and protects the lock system. The end-mounted push buttons provide easy access; lid locks and unlocks from either side for security and safety. The heavy-duty guards protect the vertical-action gas spring lid lifts and help ensure long-term durability. There is a built-in storage bin on both ends and a 4-compartment sliding tray for convenient hand tool and small item storage. The leak-proof stainless steel paddle handles prevents moisture from entering the interior.

• End mounted push buttons provide easy access
• 4 Compartment sliding tray
• Self-aligning latch pins
• Built-in storage bin on both ends
• Gear-lock self adjusting dual rotary locking system

Product Description

This is a lightweight scissor jack that fits nicely under most motorcycle frames. This jack works well with most motorcycle lifts. Can also be used by itself from floor level.

Condition: Brand New

Item No. MLIFT-MH8054

Additional Features:

· Capacity: 1100 lbs (500kgs)

· Lifting Range: 3 3/4"(95mm) to 15 3/4"(400mm) without 2 saddles and adapters

· 2 screw adapters for variable height adjustment

· Simple crank operated jack

· Wide Base with 3" wings on each side for stability

· Powder coated Paint Finish

• Capacity: 1100 lbs (500kgs)
• Lifting Range: 3 3/4"(95mm) to 15 3/4"(400mm) without 2 saddles and adapters
• 2 screw adapters for variable height adjustment
• Simple crank operated jack
• Wide Base with 3" wings on each side for stability

Product Description

This item fits 2005-2009 Ford Mustang V6 (All) 2005-2009 Ford Mustang GT (All). Manufactured in High Pressure polyurethane that is Matte White in color. Attaches directly to the factory Mustang rocker Attaches to side of vehicle with screws in the wheel wells and OE approved 3M double face tape against the body. Requires prepping, priming and painting prior to installation. This item is sold as a 1 left side skirt and all necessary mounting hardware. We also sell the 2 piece set in our store.

Product Description

The SnowSport All Terrain Plow will move as much snow as your ATV/UTV can handle and fits into those hard to reach places where a full size plow can''t go. The durable aluminum blade is lightweight and won''t tear up your grass or landscaping pavers. Model specific mounts install in minutes and can be completely removed in seconds. The complete package comes standard with our 1 Year Warranty. (ATV/UTV machine not included)

• Made of clear anodized aluminum extrusion that never rusts or needs to be painted
• Connects with a 1 1/2" square shaft interceptor
• No wiring or lever controls to freeze or malfunction
• Included: blade, push frame, hardware kit, angled interceptor, and model-specific front mount
• 1 Year Warranty